Enhancement Plus Inc.
Data Freshness & Provenance
Inspection coverage
19 inspections on record
Active providers
License status: License
Last refreshed
May 18, 2026
Latest inspection
April 16, 2026
Provenance
New York licensing inspections and DaycareCheck scoring
Quick Facts
These facts are normalized from the official record so they can be quoted directly.
Updated May 18, 2026
- Provider
- Enhancement Plus Inc.
- License number
- 889562
- Location
- 18 Carlton Road, Monsey, NY 10952
- Status
- License
- Safety grade
- C (Average), score 75.0/100
- Inspection record
- 19 inspections, last inspected April 16, 2026
- Provenance
- Official state licensing inspections and DaycareCheck scoring. Last refreshed May 18, 2026.
Safety Scorecard
20
Total Violations
Apr 16, 2026
Last Inspection
16
Capacity
Violation Timeline
Violations by month over the last 3 years, colored by severity.
All Violations (20)
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Get Inspection Alerts
Be the first to know when new inspections or violations are reported for Enhancement Plus Inc..
Nearby Daycares in Monsey
Playdate Nursery
7 Willows Road
Rubinfeld, Renee
42 E. Concord Drive
THE MARTIN LUTHER KING MULTI-PURPOSE CENTER, INC
43 Robert Pitt Dr.
Fliegman, Frimet
45 Ashel Lane
Fuchs, Ruchel
3 Walter Dr
Frequently Asked Questions
What is Enhancement Plus Inc.'s safety grade?
Enhancement Plus Inc. has a safety grade of C (Average) based on state inspection data. The composite score is 75.0 out of 100.
How many violations does Enhancement Plus Inc. have?
Enhancement Plus Inc. has 20 total violations on record, including 0 critical, 20 serious, and 0 minor.
When was Enhancement Plus Inc. last inspected?
Enhancement Plus Inc. was last inspected on April 16, 2026.