SHUSHU GROUP FAMILY DAYCARE
Data Freshness & Provenance
Inspection coverage
14 inspections on record
Active providers
License status: License
Last refreshed
May 15, 2026
Latest inspection
March 26, 2026
Provenance
New York licensing inspections and DaycareCheck scoring
Quick Facts
These facts are normalized from the official record so they can be quoted directly.
Updated May 15, 2026
- Provider
- SHUSHU GROUP FAMILY DAYCARE
- License number
- 907971
- Location
- 71 Wecker Street, Buffalo, NY 14215
- Status
- License
- Safety grade
- F (Poor), score 45.0/100
- Inspection record
- 14 inspections, last inspected March 26, 2026
- Provenance
- Official state licensing inspections and DaycareCheck scoring. Last refreshed May 15, 2026.
Safety Scorecard
28
Total Violations
Mar 26, 2026
Last Inspection
16
Capacity
Violation Timeline
Violations by month over the last 3 years, colored by severity.
All Violations (32)
At the two-year calendar date in a four year licensing cycle, a program must be in compliance with the following mid-point requirements and be able to show proof of compliance to the Office when requested: proof of compliance with the training requirements of section 416.14.
Resolution: Not Corrected
At the two-year calendar date in a four year licensing cycle, a program must be in compliance with the following mid-point requirements and be able to show proof of compliance to the Office when requested: proof of compliance with the training requirements of section 416.14.
Resolution: Not Corrected
At the two-year calendar date in a four year licensing cycle, a program must be in compliance with the following mid-point requirements and be able to show proof of compliance to the Office when requested: proof of compliance with the training requirements of section 416.14.
Resolution: Not Corrected
At the two-year calendar date in a four year licensing cycle, a program must be in compliance with the following mid-point requirements and be able to show proof of compliance to the Office when requested: proof of compliance with the training requirements of section 416.14.
Resolution: Not Corrected
At the two-year calendar date in a four year licensing cycle, a program must be in compliance with the following mid-point requirements and be able to show proof of compliance to the Office when requested: proof of compliance with the training requirements of section 416.14.
Resolution: Not Corrected
At the two-year calendar date in a four year licensing cycle, a program must be in compliance with the following mid-point requirements and be able to show proof of compliance to the Office when requested: proof of compliance with the training requirements of section 416.14.
Resolution: Not Corrected
At the two-year calendar date in a four year licensing cycle, a program must be in compliance with the following mid-point requirements and be able to show proof of compliance to the Office when requested: proof of compliance with the training requirements of section 416.14.
Resolution: Not Corrected
At the two-year calendar date in a four year licensing cycle, a program must be in compliance with the following mid-point requirements and be able to show proof of compliance to the Office when requested: proof of compliance with the training requirements of section 416.14.
Resolution: Not Corrected
At the two-year calendar date in a four year licensing cycle, a program must be in compliance with the following mid-point requirements and be able to show proof of compliance to the Office when requested: proof of compliance with the training requirements of section 416.14.
Resolution: Not Corrected
At the two-year calendar date in a four year licensing cycle, a program must be in compliance with the following mid-point requirements and be able to show proof of compliance to the Office when requested: proof of compliance with the training requirements of section 416.14.
Resolution: Not Corrected
At the two-year calendar date in a four year licensing cycle, a program must be in compliance with the following mid-point requirements and be able to show proof of compliance to the Office when requested: proof of compliance with the training requirements of section 416.14.
Resolution: Not Corrected
At the two-year calendar date in a four year licensing cycle, a program must be in compliance with the following mid-point requirements and be able to show proof of compliance to the Office when requested: proof of compliance with the training requirements of section 416.14.
Resolution: Not Corrected
At the two-year calendar date in a four year licensing cycle, a program must be in compliance with the following mid-point requirements and be able to show proof of compliance to the Office when requested: proof of compliance with the training requirements of section 416.14.
Resolution: Not Corrected
At the two-year calendar date in a four year licensing cycle, a program must be in compliance with the following mid-point requirements and be able to show proof of compliance to the Office when requested: proof of compliance with the training requirements of section 416.14.
Resolution: Not Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Before the Office issues an initial license, the applicant must complete a health and safety training course approved by the Office relating to the protection of the health and safety of children and must demonstrate basic competency with regard to health and safety standards. Such training must comply with the federal minimum health and safety pre-service training requirements. Health and safety training received prior to issuance of the license, may be applied to the initial fifteen (15) hours of training required pursuant to section 416.14(c)(1) of this Part provided that such training was received within twelve (12) months of licensure. If an applicant does not become licensed or registered within two years of successfully completing the health and safety training, the coursework must be repeated.
Resolution: Corrected
Get Inspection Alerts
Be the first to know when new inspections or violations are reported for SHUSHU GROUP FAMILY DAYCARE.
Nearby Daycares in Buffalo
HEART TO HEART CHILD CARE CENTER
86 Forman Street
Raggedy Ann and Andy Family Day Care
125 Northland Avenue
My Baby's Day Care Inc.
141 Rodney Avenue
Brinson's Family Day Care LLC
1632 Genesee Street
Marks Precious Tots Daycare
254 Carl Street
Frequently Asked Questions
What is SHUSHU GROUP FAMILY DAYCARE's safety grade?
SHUSHU GROUP FAMILY DAYCARE has a safety grade of F (Poor) based on state inspection data. The composite score is 45.0 out of 100.
How many violations does SHUSHU GROUP FAMILY DAYCARE have?
SHUSHU GROUP FAMILY DAYCARE has 28 total violations on record, including 0 critical, 28 serious, and 0 minor.
When was SHUSHU GROUP FAMILY DAYCARE last inspected?
SHUSHU GROUP FAMILY DAYCARE was last inspected on March 26, 2026.